| Zalety |
- Removes at the same time iron, manganese and hardness by ion exchange
- Removes manganese, difficult to remove by classic oxidation
- Absorption of NH3
- Increases the pH (absorption H+)
- Excellent filtration of non-dissolved particles
- A regeneration needs 30% less NaCl than when using classic softeners resins
- Chlorine has no negative impact on Crystal Right and is stronly advised when regenerating to counterattack the proliferation of bacteries.
- No specific requirements for pumps as the backwash flow is lower than the service flow
- Delivered in convenient bags of 22,7kg (28,3L)
- When used appropriately, Crystal Right has a lifetime of 20 year
|
| Jak to działa? |
- Minimal hardness CR100/CR200: 51ppm / 5.1°F / 2,87°dH
- TDS CR100 / CR200: > 80 mg/L
- Water pH range CR100: 6.3-11.0 / CR200: 7.0-11.0
- Max. content of iron- and manganese: 15 mg/L
- Capacity CR100: 30 m³/ppm; 3 m³/°F; 1,7 m³/°dH
- Capacity CR200: 40 m³/ppm; 4 m³/°F; 2,25 m³/°dH
- NH4+ will be removed by CR100 and CR200 with the help of the chlorinator
- CR100 will do a pH correction:
- pH measured at the well from 5,7 to 7 or higher
- pH measured in a lab from 6,3 to 7 or higher
- Crystal-Right cannot be rinced with classic resin cleaners, CR Clear Out is to be used.
|
| Przypisy |
Flow and capacity may vary depending on the quality of the water. We advise in all cases a test with the ‘mini CR test’. |
