UO-D 1500 FU
Item No.
5110010196
For desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). Up to 30% energy savings due to high pressure pump with frequency converter (FU) with control of permeate flow rate at constant value (PKR). Particularly quiet operation.
Description
For desalination of softened drinking water according to drinking water regulations (free chlorine not detectable).
Up to 30% energy savings due to high pressure pump with frequency converter (FU) with control of permeate flow rate at constant value (PKR). Particularly quiet operation.
General
| Features | <li>Skid mounted, complete unit</li><li>Particularly space-saving (610 x 810 x 1800 mm)</li><li>RO digital controller</li><li>Recovery from 75% to 80%</li><li>Salt rejection percentage: min. 97%</li><li>Working pressure: 14 bar</li><li>Digital flow meters</li> |
| Advantages | Advantages of the FU version:
|
| Footnotes | The unit is designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a maximum colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after three years of operation. The permeate recovery depends on the raw water quality and the type of pretreatment. |
Specifications
| Width | 605 mm |
| Height | 1810 mm |
| Depth | 810 mm |
| Weight | 200 kg |
| Permeate Flow | 1500 l/h |
| Membranes | 4040 x 5 |
| Ambient Temperature | Max. 40°c |
| Voltage | 3 x 400V / 50Hz |
| Controller | RO digital |
| Max Operating Pressure | 14 bar |
| Recovery | 75 - 80 % |
| Feedwater Connection | DN20 |
| Permeate/Concentrate Connection | DN20/15 |
| Motor Power | 2.2 kw |
| Minimal Salt Rejection | 97 % |
| Pre-fusing | 20 A |
| Conductivity Range | 1 - 999 µS/cm |
| Feedwater Pressure | min./max. 2/6 bar |
| Feedwater Temperature | min./max. 5/35 °c |
| pH Range | 3 - 11 |
