UO-D 900 CD
Ready-to-connect system including pre-treatment for desalination of drinking water according to drinking water regulations (free chlorine not detectable).
Due to integrated water pre-treatment components such as pre-filter, backflow preventer, duplex water softener and limitron hardness monitoring unit a piping on site is not necessary. Only 4 connections required (drinking water, permeate, waste water and mains connection). Continuous production of permeate possible.
| Features | <li>Skid mounted, complete unit</li><li>Duplex softener Clack CI Twin 2 x 50L (600-900l/h) or 2 x 100L (1200-2000l/h) mono resins</li><li>RO digital controller</li><li>Recovery from 75% to 80%</li><li>Salt rejection percentage: min. 97%</li><li>Working pressure: 14 bar</li><li>Voltage: 3 x 400V / 50 Hz</li><li>Digital flow meters</li> |
| Footnotes | The unit is designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a maximum colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after three years of operation. The permeate recovery depends on the raw water quality and the type of pretreatment. |
| Width | 1800 mm |
| Height | 1880 mm |
| Depth | 810 mm |
| Weight | 325 kg |
| Permeate Flow | 900 l/h |
| Membranes | 4040 x 3 |
| Ambient Temperature | Max. 40°c |
| Voltage | 3 x 400V / 50Hz |
| Controller | RO digital |
| Max Operating Pressure | 14 bar |
| Recovery | 75 - 80 % |
| Feedwater Connection | 1" IG |
| Permeate/Concentrate Connection | DN20 |
| Motor Power | 1.5 kw |
| Minimal Salt Rejection | 97 % |
| Pre-fusing | 20 A |
| Conductivity Range | 1 - 999 µS/cm |
| Feedwater Pressure | min./max. 4/6 bar |
| Feedwater Temperature | min./max. 5/35 °c |
| pH Range | 3 - 11 |
| Waste Water Connection | HT 100 |
| Capacity of softener | 200 °dH x m³ |
| Max. Raw Water Hardness In Continuous Operation | 26 °dH |
