UO 2500 ND
Item No.
5110010651
For desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). Mounted on Stainless steel skid with horizontal membrane housing.
Description
For desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). Mounted on Stainless steel skid with horizontal membrane housing.
General
| Features | <li>Complete unit skid mounted</li><li>RO 1000 controller</li><li>Recovery: up to 75%</li><li>Salt rejection percentage: 97%</li><li>Working pressure: 10 to 14 bar (depending on type)</li><li>Analogue flow meters</li> |
| Good to know | Highest desalinisation level, up to 99% and more |
| Footnotes | The unit is designed for a maximum TDS of 1,000 mg/l, a watertemperature of 15°C, a maximum colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after three years of operation. The permeate recovery depends on the raw water quality and the type of pre-treatment. |
Specifications
| Width | 2450 mm |
| Height | 1650 mm |
| Depth | 710 mm |
| Weight | 320 kg |
| Permeate Flow | 2500 l/h |
| Membranes | 4040 x 8 |
| Ambient Temperature | Max. 40°c |
| Voltage | 3 x 400V / 50Hz |
| Controller | RO 1000 |
| Max Operating Pressure | 14 bar |
| Feedwater Connection | DN32 |
| Permeate/Concentrate Connection | DN25 |
| Motor Power | 3 kw |
| Minimal Salt Rejection | 97 % |
| Pre-fusing | 16 A |
| Conductivity Range | 2 - 200 µS/cm |
| Feedwater Pressure | min./max. 2/6 bar |
| Feedwater Temperature | min./max. 5/35 °c |
| pH Range | 3 - 11 |
