UO 3000 KR
For desalination of softened drinking water according to drinking water regulations (free chlorine not detectable).
Very high permeate recovery up to 90 % due to additional concentrate stage and high salt rejection up to 98.5 %. Short ROI/payback period (mostly < 1 year) through savings in water and waste water. Concentrate flushing device KSE and connection kit ARA already integrated.
| Features | <li>Skid mounted, complete unit</li><li>RO 5000 controller</li><li>Recovery from 85% to 90%</li><li>Salt rejection percentage: min. 98,5%</li><li>Working pressure: 15 to 18,5 bar (depending on type)</li><li>Inlet pressure: 2 to 4 bar</li><li>Voltage: 3 x 380V</li><li>Analogue flow meters</li><li>Incl. concentrate rinsing</li><li>Incl. connector kit for manual cleaning set</li> |
| Advantages |
|
| Good to know | Water savings by high permeate recovery up to 90%. |
| Footnotes | The unit is designed for a maximum TDS of 1,000 mg/l, a max. SiO2-concentration of 10 mg/l, a water temperature of 15°C, a maximum colloidal index of 3 and no permeate back pressure. Under these conditions, the unit still reaches design permeate flow after three years of operation. The permeate recovery depends on the raw water quality and the type of pre-treatment. |
| Width | 3490 mm |
| Height | 1680 mm |
| Depth | 710 mm |
| Weight | 400 kg |
| Flow Rate | 3000 l/h |
| Permeate Flow | 3000 l/h |
| Membranes | 4040 x 12 |
| Ambient Temperature | Max. 40°c |
| Voltage | 3 x 400V / 50Hz |
| Controller | RO 5000 |
| Max Operating Pressure | 18.5 bar |
| Recovery | 85 % |
| Feedwater Connection | DN32 |
| Permeate/Concentrate Connection | DN25 |
| Motor Power | 5.5 kw |
| Minimal Salt Rejection | 98.5 % |
| Pre-fusing | 20 A |
| Conductivity Range | KR-permeate recirculation 20 - 2000 μS/cm Permeate 2-200 μS/cm |
| Feedwater Pressure | min./max. 2/4 bar |
| Feedwater Temperature | min./max. 5/25 °c |
| pH Range | 3 - 11 |
