UO-D 500 CD
Ready-to-connect system in compact design including pre-treatment for desalination of drinking water according to drinking water regulations (free chlorine not detectable).
Due to integrated water pre-treatment components as pre-filter, backflow preventer, duplex water softener and limitron hardness monitoring unit a piping on site is not necessary. Easiest on site-installation due to only 4 connections (drinking water, permeate, waste water and power socket).
| Features | <li>Skid mounted, complete unit (1130 x 780 x 1520mm)</li><li>Duplex softener Clack CI Twin 2 x 30L mono resins</li><li>RO digital controller</li><li>Recovery from 75% to 80%</li><li>Salt rejection percentage: min. 97%</li><li>Working pressure: 12 bar</li><li>Voltage: 230 V/50 Hz</li><li>Digital flow meters</li> |
| Footnotes | The unit is designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a maximum colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after three years of ope-ration. The permeate recovery depends on the raw water quality and the type of pre-treatment. |
| Width | 1130 mm |
| Height | 1520 mm |
| Depth | 780 mm |
| Weight | 190 kg |
| Permeate Flow | 500 l/h |
| Membranes | 4040 x 2 |
| Ambient Temperature | Max. 40°c |
| Voltage | 230V / 50Hz |
| Controller | RO digital |
| Max Operating Pressure | 12 bar |
| Recovery | 75 - 80 % |
| Feedwater Connection | DN20 |
| Permeate/Concentrate Connection | DN10 |
| Motor Power | 0.55 kw |
| Minimal Salt Rejection | 97 % |
| Pre-fusing | 16 A |
| Conductivity Range | 1 - 999 µS/cm |
| Feedwater Pressure | min./max. 4/6 bar |
| Feedwater Temperature | min./max. 5/35 °c |
| pH Range | 3 - 11 |
| Waste Water Connection | HT 50 |
| Capacity of softener | 120 °dH x m³ |
| Max. Raw Water Hardness In Continuous Operation | 28 °dH |
