UO Budget 130
Item No.
5110016120
Undersink unit for desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). Drinking water can also be desalinated without pre-treatment. However, in this case the recovery rate is reduced. The decisive factor is the water analysis.
Description
Undersink unit for desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). Drinking water can also be desalinated without pre-treatment. However, in this case the recovery rate is reduced. The decisive factor is the water analysis.
General
| Features | <li>Space saving undersink unit</li><li>Especially good value</li><li>Operating without water softening unit possible</li><li>Recovery: 50%</li><li>Salt rejection percentage: min. 95%</li><li>Voltage: 230 V/50 Hz</li> |
| Options | Conductivity measurement permeate |
| Footnotes | The units are designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a max. colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after 3 years of operation. The permeate recovery depends on the raw water quality and the type of pre-treatment. |
Specifications
| Width | 800 mm |
| Height | 360 mm |
| Depth | 360 mm |
| Weight | 31 kg |
| Permeate Flow | 130 l/h |
| Membranes | 4021 x 1 |
| Ambient Temperature | Max. 40°c |
| Voltage | 230V / 50Hz |
| Controller | RO 524 |
| Max Operating Pressure | 10 bar |
| Recovery | 50 % |
| Feedwater Connection | R 3/4" AG |
| Permeate/Concentrate Connection | DN10 |
| Motor Power | 0.4 kw |
| Minimal Salt Rejection | 95 % |
| Pre-fusing | 16 A |
| Conductivity Range | 1 - 99 μS/cm |
| Feedwater Pressure | min./max. 3/6 bar |
| Feedwater Temperature | min./max. 5/35 °c |
| pH Range | 3 - 11 |
