Pytania? Zadzwoń do nas +48 22 270 13 88
pl Polski (Polska) en English
Obsługa klienta Logowanie
Powrót do podsumowania
Brak obrazu dla tego produktu

Pallas Magnetic Filter Premium DN50 - 2" - 40m³ - Flanged - 2 pressure gauges - 2 magnets - kit03

Nr pozycji 13560000118
Obudowa magnetycznego filtra workowego wykonana ze stali nierdzewnej to urządzenie do oczyszczania wody w obiegach zamkniętych wody gorącej w systemach grzewczych, a także w układach chłodzenia i obiegu wody lodowej. Zamknięte obiegi wodne mogą zawierać zawieszone cząstki żelaza i innych
Produkt nie może być zamówiony w tej chwili.
Opis

Obudowa magnetycznego filtra workowego wykonana ze stali nierdzewnej to urządzenie do oczyszczania wody w obiegach zamkniętych wody gorącej w systemach grzewczych, a także w układach chłodzenia i obiegu wody lodowej.

Zamknięte obiegi wodne mogą zawierać zawieszone cząstki żelaza i innych materiałów. Ich osadzanie może powodować:

  • straty energii
  • korozję pod osadami
  • wzrost zużcycia chemikaliów do utrzymania żądanych stężeń
  • przecieki na uszczelnieniach pomp – straty wody i wprowadzenie tlenu do wody
  • środowisko sprzyjające rozwojowi bakterii

Obudowa magnetycznego filtra workowego jest skuteczną odpowiedzią na te problemy

OGÓLNE
D365 item number 13560000118
Item number 1632015096
Jak to działa?

Set up

Magnetic Bag Filter Housing is set up in derivation on the return of the circuit to be treated. Mounting a balancing valve or a charge pump will force the flow  of the fluid in the filter.
The inlet and outlet isolation valves will also allow to use the filter as a pot for introducing products for the punctual treatments of the circuit.
Draining a low point to facilitate loading of the filter bag and cleaning of the magnetic bars.

Ideal installation

  • The filtration station is placed and fixed on the ground by its 3 feet
  • The filtration station is placed close to the preparation unit (9)(boiler,..),on the loop return circuit and at a suitable height in order to enable its connection to the unit of preparation and, on the other hand, its emptying by the drain present on its lower wall (shut off valve(5) and drainage of this drainage water.)
  • A shut-off valve will be mounted upstream(2) and downstream (6) of the filtration station to allow for maintenance without interrupting the operation of the plant.
  • A water inlet will be provided for filling with a shut-off valve(4).
  • An event ball valve (7) and a 10 bar pressure gauge(8) will be mounted on the cover with a 2 way connection.
  • A balancing valve (1) and a circulator(3)will be mounted in the loop return circuit.
Obsługa

Once a year*, clean the collector by changing the filter bag or cleaning it by turning it up and cleaning the magnetic bars with a dry rag.

Dismantling

1. Close the inlet and outlet valve.
2. Depressurize by opening the drain valve at the bottom.
3. Open event on top.
4. Loosen the wing bolts to pivot the lid.
5. Take out the spring and the magnetic system and clean with a rag.
6. Remove the filter bag from the stainless steel basket, clean it and/or replace it with a new one.

Reassembly

7.Repositionning the filter bag in the stainless steel basket as well as the bars.
8.Close the filter cover.
9.Close the drain valve.
10.Open the inlet valve until overflow by the event.
11.Close the event.
12.Open the outlet valve.

 

*For the technical reasons, the sludge collecting filters must be drained regularly according to the state and quantity of water in the circuit, at least once a year. At the time of this maintenance, clean the magnetic bars as well as the stainless steel sieve basket and change the filter bag.
Przypisy

Wymiar "C" jest ruchomy zależnie od sposobu montażu.
Specyfikacje
Średnica 214 mm
Średnica pokrywy 312 mm
Dimensions Technical Drawing A min: 1120 mm B: 799,5 mm C min: 188 mm C max: 858 mm D: 219 mm
Max. Temperatura 90°c
Zakres przepływu 25 - 40 m³/h
Spadek ciśnienia 0,21 bar
General Technical Data

Technical characteristics

Every kind of particles with a size greater than 50 microns will be stopped by the filter bag while the high magnetic field magnetic bars  will capture all the ferrous particles resulting from the corrosion of the circuit.
In addition, the bag filter housing will allow the introduction of conditioning products such as corrosion inhibitors or antiscalant.

Filtration thickness: 50 microns are stopped by the filter bag
Polished 304 stainless steel treatment chamber with stainless steel magnetic bars for magnetic metal oxide capture.
DN 20 and DN 32 model:  1 magnet 300 mm
DN 40 model: 2 magnets 300 mm
DN 50 model: 2 magnets 600 mm
DN 80 and DN 80 Flange models: 2 magnets 600 mm
Decantation by reduction of the speed of the water flow in the stainless steel chamber.
EPDM O’ring sealing  D. 124 mm torus D.6 mm.
Inlet and outlet, manometers pipes and bottom drain:  all in Stainless steel
Inlet and outlet on same side for BFH01Q model (unilateral)
Adjustable stainless steel feet
Closing of the cover by M12 wing bolts stainless steel with ball joints and clips, fully dismountable.
Stainless steel basket and  basket holder for holding the filter bag.
0-10 bars Glycerin Pressure gauge with brass pipe and air vent valve with D.4-6 mm cannula and compression.
Connection ¼” male radial.
Delivered with T adaptor, ball valve purge and air bleed/filling valve or corrosion inhibitor /scaling for PE pipe 4-6 mm.
Max. pressure: 10 bar
Max. temperature:90°C
Drain with plug: ½” F 15x21
Fitting event ¼” F8/13
Recommended water quality: 14°dH Class 3 (or 25°F).


Choice of the model following the circuit to be treated in derivation

  • DN20 model: A bypass circuit with 8 m³ flow (5 to 20 rooms - 2m³)
  • DN32 model: A bypass circuit with 26 m³ flow (5 to 50 rooms - 8m³)
  • DN40 Model: A bypass circuit with 52 m³ flow (50 to 200 rooms - 17m³)
  • DN50 Model: A bypass circuit with 103 m³ flow (200 to 400 rooms - 34m³)
  • DN80 Model: A bypass circuit with 180 m³ flow (400 to 600 rooms - 48m³)
    Wczytywanie
    Wczytywanie